Aluminum Extrusion Cost Calculator
Estimate cost per part from weight, profile size and anodizing options. Review material, extrusion and finishing costs with the price inputs and assumptions used.
Cost breakdown
Enter the parameters and calculate to see material, extrusion, anodizing and model allowances.
Reference data and scope
Material: AL5052 at RMB 26,630/metric tonne. Recorded date: 11-4-2026.
Product description: Magnesium-containing alloy, excellent corrosion resistance for marine use..
Currency reference: 6.8 RMB/USD. Its observation date is not recorded.
The material record is a price reference, with its original quote date unverified. Conversion and finishing rates are internal model assumptions.
Tooling, packaging, shipping and order-quantity effects are outside this per-part formula. Obtain a drawing-based quote for purchasing.
How much does an aluminum extrusion part cost?
A per-part estimate combines material weight, the extrusion rate for the profile-size bracket and the selected finish, then applies the model’s fixed allowance and multiplier. With the displayed reference inputs, a 1 kg part in the ≤120 mm bracket without anodizing is USD 4.95 per part. Tooling, order quantity, packaging and shipping need a separate quote; the model does not establish one universal market price per kilogram.
Worked extrusion cost examples
These model examples use the stored AL5052 reference of RMB 26,630/metric tonne and 6.8 RMB/USD. The material record date is 11-4-2026; original quote and FX observation dates are unverified. These totals are not supplier quotations.
| Case and inputs | Weight, kg | Material, USD | Extrusion, USD | Anodizing, USD | Total/part |
|---|---|---|---|---|---|
| 1 kg, plain finish≤120 mm circle; no anodizing | 1.000 | 3.9162 | 0.5147 | 0.0000 | USD 4.95 |
| Weight from geometry100 mm² × 1,000 mm; ≤120 mm circle; no anodizing | 0.271 | 1.0613 | 0.1395 | 0.0000 | USD 1.40 |
| Larger, colored profile1 kg; >200–300 mm circle; 12–15 μm colored anodizing | 1.000 | 3.9162 | 0.7353 | 0.6324 | USD 5.89 |
The cases were checked against the local model and existing calculator outputs. The 0.271 kg case uses the stated density assumption of 2.71 g/cm³.
How profile size is entered
Use the smallest circle enclosing the cross-section to choose a size bracket. This local cost model maps the bracket to a conversion rate and an indicative press class. Actual equipment selection also requires profile and production review.
How the cost is calculated
Material, extrusion and anodizing rates are in RMB per metric tonne. Multiply each rate by part weight in kg, divide by 1,000, then divide by RMB per USD to obtain USD per part.
Total = (material + extrusion + anodizing + RMB 0.50 ÷ FX) × 1.10
The fixed allowance and multiplier are local model settings. Their values are included in the breakdown so you can compare estimates on a consistent basis.
For metric geometry, kg = mm² × mm × 2.71 ÷ 1,000,000. Imperial dimensions are converted using 1 inch = 25.4 mm and 1 lb = 0.45359237 kg.
Using the estimate for a purchasing decision
Which alloy and product form does the reference cover?
The current model reads the uploaded 5052 material reference. Its recorded description is shown with the result; the file does not establish a dated extrusion billet quotation or a specific temper. Confirm the alloy, temper, product form and dated material quote for an actual order.
Can I use the result as a price per kilogram?
The result shows an effective USD/kg figure by dividing the total per-part estimate by part weight in kg. The fixed per-part allowance means this figure can change with part weight. Order quantity and die amortization are not inputs in this model.
What needs a separate quote?
Tooling, packaging and shipping are outside the per-part formula. A production quote should confirm profile geometry, alloy and temper, finish requirements, order quantity, inspection needs and delivery terms.
Model version cpf-extrusion-cost-1. Content revised November 5, 2026. Material and FX dates are stated separately. Conversion and finishing rates are reference assumptions of the CPF cost model.