Die Casting Tolerances: Size, Limits and Die Conditions
Look up stored CT4–CT7 dimensional bands and optional geometric references for aluminum and zinc die-casting design review. Identify the feature, die-half relationship and reference span before interpreting the result. The original standard and edition of these legacy numeric tables are not recorded; they are not verified NADCA or ISO tables.
Die casting tolerance calculator
Enter feature size D. For optional geometric references, also enter whole-part span L in the direction under review. Dimensions greater than 0 through 630 mm are stored; geometric tables have separate ranges.
How do you read a die casting tolerance?
A dimensional tolerance is the full permitted size band. If a stored band T is centered on nominal size D, the lower deviation is −T/2, the upper deviation is +T/2, and the limits are D − T/2 to D + T/2. This calculator uses that centered interpretation; a drawing may allocate the same band asymmetrically. A geometric zone reference is unsigned and must not be treated as a ± size tolerance.
| Quantity | Meaning | Value (mm) |
|---|---|---|
| Full dimensional band T | Maximum minus minimum size | 0.56 |
| Lower / upper deviation | Signed offsets from D | −0.28 / +0.28 |
| Symmetric notation | Half the stored band on either side | ±0.28 |
| Lower / upper size limit | Nominal plus the signed deviations | 99.72 to 100.28 |
Which size and die conditions should you enter?
The dashed divider is the parting line. D is the nominal feature size; L is the full part span in the direction being reviewed, used by the separate legacy geometric tables. The moving-element classification retains the stored zero/one/two-feature choices. Its original feature definitions require source confirmation; do not equate the ordinary opening of the ejector die half with a moving core or slide.
- Select the material family and an agreed CT grade. At an identical grade and D, the stored dimensional number is identical for both families.
- Enter D in mm or inch. Enable geometric references only when you can identify L and the feature/datum die relationship.
- Read the snapshot, signed size limits and separate unsigned zones. Changing an input clears the snapshot; calculate again before sharing or printing.
Reproducible die casting tolerance examples
Calculated from the same model as the tool and API. These are software reference cases, not independent standard audits or measured process capability. Values in this table are millimetres.
| Inputs | Full band / ± deviation | Lower / upper limits | Unsigned geometry references |
|---|---|---|---|
| Aluminum D=100, CT5, L=150; same half, neither moving | 0.56 / ±0.28 | 99.72 to 100.28 | Position group 0.3; flatness 0.2; coaxiality group 0.55 |
| Aluminum D=100, CT6, L=150; same half, neither moving | 0.78 / ±0.39 | 99.61 to 100.39 | Position group 0.3; flatness 0.2; coaxiality group 0.55 |
| Zinc D=25, CT4, L=63; different halves, one moving element | 0.3 / ±0.15 | 24.85 to 25.15 | Position group 0.3; flatness 0.1; coaxiality group 0.7 |
Are CT grades the same as NADCA standard and precision tolerances?
Do not substitute one system for another. NADCA publishes standard and precision tolerances as part of its die-casting product specification guidance. Its parting-line and moving-die considerations depend on the actual feature and die configuration. This legacy CT lookup has no projected-area input and does not calculate a NADCA parting-line separation allowance, die shift or moving-core addition. Do not add or halve its geometric numbers to invent such an allowance.
Identify dimensions formed within one die half, across the parting line or by a moving element on the drawing. Agree the applicable standard, edition, datum scheme and inspection method with the die caster. A tight machined feature also needs its own machining requirement; an as-cast reference is not a machining capability statement.
From a tolerance reference to a manufacturing decision
- Review critical fits, seal faces and datum relationships before tightening a whole drawing. Tool construction, sampling and secondary operations affect cost and feasibility.
- Specify asymmetric size allocations and geometric controls explicitly when needed. A grouped legacy reference cannot define every position, runout or coaxiality inspection.
- Use actual cavity, lot and measurement data to evaluate process capability. An allowed tolerance is an acceptance requirement; it is not evidence that a supplier can repeatedly meet it.
Sources and model scope
The CT values and six auxiliary reference tables are retained from CPF’s existing data without numerical changes. Their original standard, edition, import provenance and complete engineering transcription audit are unverified. Stored ranges use greater-than lower and inclusive upper endpoints. A null upper bound in a final row is interpreted as open-ended; null reference cells remain unavailable, not zero. Geometry labels remain legacy groupings. This revision validates inputs, preserves unit endpoints and shares one model across the API, interactive tool and examples. It does not certify GB/T, ISO 8062 or NADCA compliance. A named independent engineering reviewer is not recorded.
For the applicable published guidance, consult NADCA’s 2024 Product Specification Standards description and the International Zinc Association design rules. These support the design context, not certification of the stored numbers. Model CPF-die-casting-2026-11-12; revised November 12, 2026.