Casting Tolerance & Machining Allowance Calculator

Look up a dimensional tolerance by material and casting process, inspect the selected CT grade, and separate size variation from the stock needed for machining.

Scope: local process-to-CT recommendations, dimensional tolerance bands and machining-allowance tables. The original table edition is not recorded. Geometrical tolerance, draft angle, shrinkage compensation and automatic wall-thickness grade adjustments are outside this calculation.

Use the drawing’s grade when specified. The local process recommendation is a starting point for discussion, not proof of a foundry’s process capability. CT16 is a legacy dataset label and is not presented as the 2023 DCTG15wt designation.

How tolerance differs from machining allowance

F: final machined dimensionStockStockFinal material envelope

A larger tolerance band allows more dimensional variation. More machining stock provides material to remove. These solve different problems: adding stock does not make the as-cast part more accurate.

For an external feature, stock is added outside the finished faces. For a bore or cavity that will be machined larger, stock reduces the rough opening. A step or one-sided operation needs its own datum and stock plan.

Three worked local-table examples

100 mm nominal feature. Values checked against the local datasets and API on 2026-11-02; these checks do not certify a standard edition or a foundry’s capability.

Material / processCT allowanceTotal bandRMARecalculate
Steel / manual sand mould±2.20 mm4.40 mm1.40 mmLoad example
Steel / silica-sol investment±0.20 mm0.40 mm0.70 mmLoad example
Aluminum / magnesium pressure die casting±0.20 mm0.40 mm0.30 mmLoad example

In the first case the feature range is 97.80–102.20 mm. A 1.40 mm RMA does not widen that acceptance range. The three examples use different local process recommendations; they are not evidence that the processes are interchangeable.

When to machine or review the process

  • Identify bearing seats, sealing faces and mating features that need machining; define datums and inspect the relevant features.
  • Before tightening the CT grade, ask for evidence that the foundry can maintain it with the selected material, mould and production quantity.
  • For wall thickness, draft or geometrical control, agree separate requirements; this calculator does not automatically change the grade or compute those checks.
  • When stock is insufficient, a rough opening becomes non-positive, or a result is unavailable, review the geometry and allowance plan before quoting.

Sources and maintenance

Local data: process-to-CT recommendations, CT band records, RMA grades and allowance records. The original editions are not recorded. For the scope of the published standard, see ISO 8062-3:2023; this catalogue link does not establish that the local transcription matches that edition. Maintenance: Custom Parts Factory. Presentation/API version v1.1; revised 2026-11-02. Named engineering reviewer: not recorded.

Existing rough-dimension diagrams

F = final feature dimension; R = rough target; RMA = machining allowance; CT = total tolerance band.

Existing casting allowance reference diagram 1Existing casting allowance reference diagram 2Existing casting allowance reference diagram 3