Steel Forging Tolerance Calculator

Lookup F-grade and E-grade tolerances per EN 10243-1. Read the steel forging tolerance guide for material groups, shape complexity, and grade selection.

Prefill via URL: /dzgc?size=100&weight=5&unit=Metric&difficulty=m1&complexity=s1

For copper forging tolerance, check here. For aluminum forging tolerance, check here.

Calculation Parameters

Shape Complexity = final part weight / bounding-shape weight, for example, in the diagram below, the bounding shape is the larger cylinder

Shape Complexity Diagram

For copper forging tolerance, check here. For aluminum forging tolerance, check here.

From tolerance lookup to a manufacturing decision

Permissible tolerance is the allowed variation under the selected specification. Process capability describes variation demonstrated by a particular process, machine, material and inspection system. This calculator supplies a table lookup; it does not measure Cp/Cpk or guarantee a supplier can hold the limits.

This EN 10243-1 reference concerns steel drop and vertical press die forgings. It does not establish CNC finishing tolerances, an open-die forging specification or horizontal-upset capability. Confirm the applicable standard and delivery condition on the drawing.

Choose the dimension and shape factor

S = forging mass / enveloping-shape mass
Illustration of an enclosing shape. Use the appropriate enveloping geometry for the forging, keep both masses in the same units, then select S1–S4. A ratio closer to zero means the forging occupies less of its envelope.
Feature lengthThickness across diesParting line
Identify the measured feature and whether it crosses die halves. Length and thickness use separate rows; parting-line mismatch, draft and surface condition require separate consideration.

Worked lookup examples

Metric, vertical forging. Values below were checked against the local table entries and API on 2026-11-02. These are software/table consistency checks, not an independent certification of the original standard transcription.

Case and inputsF upper / lower (mm)E upper / lower (mm)F total band (mm)F size limits (mm)
Compact flange
100 mm · 5 kg · M1 / S1
+1.3 / −0.7+0.8 / −0.42.099.3–101.3
Branched part, same size and mass
100 mm · 5 kg · M1 / S4
+1.9 / −0.9+1.2 / −0.72.899.1–101.9
Larger alloy-steel forging
250 mm · 20 kg · M2 / S3
+3.0 / −1.5+1.9 / −0.94.5248.5–253.0

Compact flange: For this 100 mm feature, the F band is 2.0 mm wide, not ±2.0 mm. Check the mating feature before accepting an as-forged fit.

Branched part, same size and mass: Changing only S1 to S4 widens the F dimensional band. The drawing should identify the chosen enveloping shape and support the complexity calculation.

Larger alloy-steel forging: Size, mass and material group all differ. F thickness is separately +3.3 / −1.7 mm here; do not copy the size tolerance onto thickness.

When to machine, change the process or request review

  • For bearing seats, sealing faces, locating bores and tightly controlled interfaces, compare the full tolerance band with the functional requirement. Plan finish machining and appropriate stock where the as-forged limits are too wide.
  • Before selecting a close grade, ask the supplier to confirm die condition, process control and inspection capability. A tighter grade alone is not capability evidence.
  • For thin webs, branches, dimensions across die halves or uncertain material/shape classification, review the drawing and feature definitions before using the lookup in an RFQ.
  • If secondary operations dominate cost, compare forging plus machining with another manufacturing route using the complete part geometry and batch quantity.

Sources, maintenance and next steps

Standard reference: BS EN 10243-1:1999, BSI catalogue. Implementation: CPF steel forging lookup tables; presentation model v1.1. Content and example check: 2026-11-02. Maintenance: Custom Parts Factory. Named engineering reviewer: not recorded. Confirm the licensed standard edition and any required corrigenda for contractual acceptance.